EN
- Zakładka Podgląd
- Zalecane produkty
This series of dry-type transformers with fillers and thin insulation. Because the coils are encapsulated by epoxy resin,they are flame-retardant, fireproof, explosion-proof,maintenance-free, pollution-free and small in size, and can be directly installed in the load center.
Meanwhile,the scientific and reasonable design and pouring process make the product have a smaller partial discharge amount, lower noise and stronger heat dissipation capacity.Under the condition of forced air cooling, it can operate continuously at 140% of the rated load for a long time, and is equipped with an intelligent temperature controller for centralized monitoring and control.
The foil-type coil can solve problems such as high short-circuit stress of products wound with low-voltage and large-current coils, unbalanced ampere-turns, poor heat dissipation effect, large winding helix angle, and unstable quality of manual welding.
At the same time, the winding ends of our company adopt resin sealing, curing, moisture-proof and anti-fouling measures, and the copper busbars are automatically welded by argon arc welding.
Wymuszanie standardów
GB 1094-2013 《Transformator mocy》
GB/T 2900.95 Terminy elektryczne transformatory, regulatory napięcia i dławiki
GB/T 10228 Parametry techniczne i wymagania dotyczące transformatorów mocy suchych
GB 20052-2020 Wartość graniczna sprawności energetycznej transformatora mocy i zużycie energii
IEC 60076 《Transformator mocy》
Opis typu
Normalne warunki serwisowe
Poniżej wysokości 1000 metrów
Najwyższa temperatura otoczenia wynosi +40 stopni Celsjusza
Najwyższa średnia temperatura dzienna wynosi +20 stopni Celsjusza
Najniższa temperatura na zewnątrz wynosi -20 stopni Celsjusza
Parametr wydajności
| Moc znamionowa (kVA) | Grupa napięciowa | Impedancja napięcia (%) | SC(B)10 | Soundlevel | Wymiary (mm) | Waga (kg) | ||||||
| Wysokie napięcie (kV) | Zakres kranu | LV(kV) | Strata bez obciążenia (W) | Load loss 120℃ (W) | No-load curren(%) | (dB) | L | W | H | |||
| 30 | 101110.56.66.36 | ±2x2.5%±5% | 0.4 | 4 | 190 | 710 | 2.0 | 44 | 620 | 400 | 600 | 220 |
| 50 | 270 | 1000 | 2.0 | 44 | 650 | 400 | 740 | 320 | ||||
| 80 | 370 | 1380 | 1.5 | 45 | 750 | 500 | 770 | 460 | ||||
| 100 | 400 | 1570 | 1.5 | 45 | 800 | 500 | 830 | 580 | ||||
| 125 | 470 | 1850 | 1.3 | 46 | 950 | 880 | 1090 | 750 | ||||
| 160 | 540 | 2130 | 1.3 | 46 | 950 | 880 | 1090 | 780 | ||||
| 200 | 620 | 2530 | 1.1 | 47 | 1050 | 900 | 1200 | 850 | ||||
| 250315 | 720 | 2760 | 1.1 | 48 | 1050 | 900 | 1200 | 1030 | ||||
| 400 | 880980 | 34703990 | 1.01.0 | 4849 | 10801110 | 900950 | 12501270 | 10601400 | ||||
| 500 | 1160 | 4880 | 1.0 | 49 | 1130 | 950 | 1380 | 1550 | ||||
| 630 | 1340 | 5880 | 0.85 | 49 | 1200 | 950 | 1450 | 1820 | ||||
| 630 | 6 | 1300 | 5960 | 0.85 | 50 | 1320 | 950 | 1375 | 1850 | |||
| 800 | 1520 | 6960 | 0.85 | 51 | 1310 | 1000 | 1315 | 2150 | ||||
| 1000 | 1770 | 8130 | 0.85 | 52 | 1400 | 1070 | 1520 | 2550 | ||||
| 1250 | 2090 | 9690 | 0.85 | 53 | 1440 | 1150 | 1570 | 3020 | ||||
| 1600 | 2450 | 11730 | 0.85 | 54 | 1650 | 1200 | 1795 | 4500 | ||||
| 2000 | 3050 | 14450 | 0.7 | 55 | 1800 | 1260 | 1870 | 5300 | ||||
| 2500 | 3600 | 17170 | 0.7 | 56 | 1950 | 1260 | 2035 | 6200 | ||||
